Room centre
Length + width = starting diameterRoom 5 × 4 m → about 75 cm for a central pendant or chandelier.
Voer je code in bij het afrekenen.
Details
Three close views show the lamp’s wood surface, the metal shade where it meets the wood, and the pull cord leaving the body
Compact wall lamp
A small wall lamp sets a solid ash body against a compact metal shade in brass, silver, or walnut. Light leaves the shade into the space just in front of it, suited to a bedside, a reading nook, or either side of a hallway mirror. A fabric pull cord hangs from the body for a simple on and off
Highlights
The ash body stays the same while the metal shade finish changes, and the lamp uses a separate G4 bulb made for AC 110V
The body is solid ash, not veneer, and the grain, color depth, and tone vary naturally from one piece to the next
The hand-finished metal shade is offered in warm brass, brushed silver, or a walnut stain, with the same ash body on every version
It uses a G4 bi-pin bulb for AC 110V only. A 12V G4 bulb is not compatible, and the bulb is sold separately, with LED recommended
The lamp measures 12.5 cm long, 5.5 cm wide, and 12.5 cm high, or 4.9 by 2.2 by 4.9 inches
Specifications
| Height | L 12.5 × W 5.5 ×: 4.9″ (12.5 cm) |
|---|---|
| Socket | G4 bi-pin base |
| Voltage | AC 110V only |
| Bulb | Sold separately; LED recommended; not compatible with 12V G4 bulbs |
| Switch | Pull cord on the lamp |
| Wiring | Hardwired |
| Body | Solid ash wood |
| Shade | Metal |
| Shade finishes | Brass, silver, walnut |


Walnut color & Brass · Send 1 light fixtureL 4.9″ x W 2.2″ x H 4.9″ (Pull cord switch)
Walnut color & Silver · Send 1 light fixtureL 4.9″ x W 2.2″ x H 4.9″ (Pull cord switch)
Does The Selected Shipping Service Apply To My Country And What Is The Carrier? How Long Will It Take To Arrive?
If you are not sure if our delivery service is supported in your country or region, please get in touch with us via [email protected]
Delivery times = Process time (order preparation) + Shipping time
Free shipping:
• Carrier: DPD
• Cost: Free
• Process Time: 1-2 weeks
• Shipping Time: 2-4 weeks: To the Netherlands and most European countries (except Iceland, Norway, Cyprus)
Fastest shipping:
• Carrier: DHL/DPD
• Cost: €10 - €200 (Shipping costs vary depending on the number of products)
• Process Time: 1-3 days
• Shipping Time:
2-5 days: Germany
3-7 days: France, Spain, Italy, Nertherlands, Belgium, Poland, Sweden, Austria
6-10 days: Other European countries
Corresponding products: Specified products (For details, please refer to SKU information of each product page)
Note: Tariff-free
Specific countries: Norway, Iceland and Cyprus
• Carrier: UPS/DHL Express
• Cost: €100 per piece
• Process Time: 1-2 Weeks
• Shipping Time: 5-7 Days
Note: Fluctuating delivery times depending on flight information for the order time.
Transport time
Transport time = process time (order preparation) + shipping time
process time: For most cases, we will process your order within 7-14 days (Only the order preparation. Not including the shipping time and delivery time).
European region(except Iceland, Norway, Cyprus): 2-5 Weeks | Free Shipping
EMS European region(except Iceland, Norway, Cyprus): 3-7 Working Days | Fast Shipping
After the customer pays the fast shipping fee (including Fast Shipping, FedEx and other fast shipping methods), if it has been shipped. Shipping costs are non-refundable.
How Can I Track The Package?
How Can I Cancel My Order?
Note:
What Should I Do If The Goods Received Are Damaged (incorrect)?
When Will I Receive My Refund?
Does The Voltage Required By The Product I Purchased Match The Country Where I Am Located?
A visual starting point for scale, height and quantity. Begin with the fixture type, then compare the dimensions against your room, table, bed or wall.
Center-to-center spacingGap between shadesMeasure the room or the furniture the light belongs to. The ranges below are design starting points; always check the exact product dimensions and installation instructions.
Room 5 × 4 m → about 75 cm for a central pendant or chandelier.
Measure from the tabletop or worktop to the lowest point of the fixture.
For open circulation areas, check the complete drop including canopy and suspension.
Use the table or island as the anchor. Draw the full shade widths on paper before you decide how many to buy.
Use the same room formula as a pendant, then allow extra visual weight for multiple arms, tiers or a deep body.
Flush and semi-flush fittings suit lower ceilings, bedrooms, hallways and rooms where a clear walking route matters.
Wall lights are read at eye level, so mark the position while standing, sitting and using the room as intended.
Table lamps work best when the base, shade and furniture read as one proportion. Judge the light from the seated position.
Choose the position from the chair or sofa first, then check the base, cord and shade against the walking path.
Bring the product page, room measurements and a quick photo to your installer. The product instructions and local electrical requirements always take priority.
Use paper or tape to test the shade width, lowest point and sightlines.
Confirm the ceiling, wall or junction box supports the complete fixture weight.
Check voltage, dimmer compatibility, bulb or driver and any location rating.