Room centre
Length + width = starting diameterRoom 5 × 4 m → about 75 cm for a central pendant or chandelier.
Voer je code in bij het afrekenen.
Details
Brushed metal, a matte shade, and a compact joint show how the lamp is assembled
Twin-arm floor lamp
A slim metal floor lamp carries two adjustable arms and shades, finished in copper plating with matte black or matte white. Each arm rotates, tilts, and extends so the shades can send light toward a chair, a desk, or out into a corner. At 26 inches wide and 62.2 inches tall, it stands beside seating for reading or task work
Highlights
Aluminum arms and shades, copper plating, and a choice of matte black or matte white
The arms and shades are aluminum, on a metal body with copper plating
The finish is copper plating with matte white, or copper plating with matte black
It accepts an LED or Edison bulb on a G9 base and runs on AC 110–240V
Two arms rotate, tilt, and extend, and each shade tilts and rotates on its arm
Specifications
| Diameter | ∅ 158cm (26 ″) |
|---|---|
| Height | 62.2 ″. Dia 66cm: ∅ 26″ (158 cm) |
| Cord | 59.1″ |
| Source | LED bulb or Edison bulb |
| Base | G9 |
| Voltage | AC 110–240V |
| Control | Push-button switch on the cord |
| Mounting | Floor |
| Construction | Metal, aluminum alloy |
| Finish | Copper plating and matte white, or copper plating and matte black |


Copper plating & Matte White · US Plug∅ 26″ x H 62.2″ / Dia 66cm x H 158cm
Copper plating & Matte Black · US Plug∅ 26″ x H 62.2″ / Dia 66cm x H 158cm
Does The Selected Shipping Service Apply To My Country And What Is The Carrier? How Long Will It Take To Arrive?
If you are not sure if our delivery service is supported in your country or region, please get in touch with us via [email protected]
Delivery times = Process time (order preparation) + Shipping time
Free shipping:
• Carrier: DPD
• Cost: Free
• Process Time: 1-2 weeks
• Shipping Time: 2-4 weeks: To the Netherlands and most European countries (except Iceland, Norway, Cyprus)
Fastest shipping:
• Carrier: DHL/DPD
• Cost: €10 - €200 (Shipping costs vary depending on the number of products)
• Process Time: 1-3 days
• Shipping Time:
2-5 days: Germany
3-7 days: France, Spain, Italy, Nertherlands, Belgium, Poland, Sweden, Austria
6-10 days: Other European countries
Corresponding products: Specified products (For details, please refer to SKU information of each product page)
Note: Tariff-free
Specific countries: Norway, Iceland and Cyprus
• Carrier: UPS/DHL Express
• Cost: €100 per piece
• Process Time: 1-2 Weeks
• Shipping Time: 5-7 Days
Note: Fluctuating delivery times depending on flight information for the order time.
Transport time
Transport time = process time (order preparation) + shipping time
process time: For most cases, we will process your order within 7-14 days (Only the order preparation. Not including the shipping time and delivery time).
European region(except Iceland, Norway, Cyprus): 2-5 Weeks | Free Shipping
EMS European region(except Iceland, Norway, Cyprus): 3-7 Working Days | Fast Shipping
After the customer pays the fast shipping fee (including Fast Shipping, FedEx and other fast shipping methods), if it has been shipped. Shipping costs are non-refundable.
How Can I Track The Package?
How Can I Cancel My Order?
Note:
What Should I Do If The Goods Received Are Damaged (incorrect)?
When Will I Receive My Refund?
Does The Voltage Required By The Product I Purchased Match The Country Where I Am Located?
A visual starting point for scale, height and quantity. Begin with the fixture type, then compare the dimensions against your room, table, bed or wall.
Center-to-center spacingGap between shadesMeasure the room or the furniture the light belongs to. The ranges below are design starting points; always check the exact product dimensions and installation instructions.
Room 5 × 4 m → about 75 cm for a central pendant or chandelier.
Measure from the tabletop or worktop to the lowest point of the fixture.
For open circulation areas, check the complete drop including canopy and suspension.
Use the table or island as the anchor. Draw the full shade widths on paper before you decide how many to buy.
Use the same room formula as a pendant, then allow extra visual weight for multiple arms, tiers or a deep body.
Flush and semi-flush fittings suit lower ceilings, bedrooms, hallways and rooms where a clear walking route matters.
Wall lights are read at eye level, so mark the position while standing, sitting and using the room as intended.
Table lamps work best when the base, shade and furniture read as one proportion. Judge the light from the seated position.
Choose the position from the chair or sofa first, then check the base, cord and shade against the walking path.
Bring the product page, room measurements and a quick photo to your installer. The product instructions and local electrical requirements always take priority.
Use paper or tape to test the shade width, lowest point and sightlines.
Confirm the ceiling, wall or junction box supports the complete fixture weight.
Check voltage, dimmer compatibility, bulb or driver and any location rating.