Room centre
Length + width = starting diameterRoom 5 × 4 m → about 75 cm for a central pendant or chandelier.
Voer je code in bij het afrekenen.
Details
Three close views show the shade’s woven surface, its finished lower edge, and the brass hardware above a fabric-covered base
Table lamp
A natural linen cone shade tops a tall, squared linen stem, with a brass collar at the neck and a small brass base. Warm, soft light spreads through the linen and pools down onto the surface below. It sits quietly beside a wood bed frame, lighting a nightstand or side table without crowding what else is there
Highlights
Linen diffuses the bulb into a warm glow meant for a nightstand, side table, or reading nook
A natural linen cone shade and squared linen stem meet a brass collar and a small brass base. Listed materials are metal and fabric
Finishes are Dark Grey, Linen, and Gold
Takes an LED bulb or an Edison bulb on an E26 or E27 base
Listed around 29 inches tall, it fills the space above a bedside table and sends soft light onto the surface below
Specifications
| Height | Size: Dia 45cm: ∅ 17.7″ (75 cm) |
|---|---|
| Stem width | 11″ (28 cm) |
| Cord | 59″ (150 cm), extendable upon request |
| Light source | LED bulb or Edison bulb |
| Base type | E26 or E27 |
| Voltage | AC 110–240V |
| Material | Metal, fabric |
| Finishes | Dark Grey, Linen, Gold |






Dark Grey · US PlugDia 28cm x H 40cm / ∅ 11″ x H 15.7″
Linen · US PlugDia 28cm x H 40cm / ∅ 11″ x H 15.7″
Dark Grey · US PlugDia 40cm x H 60cm / ∅ 15.7″ x H 23.6″
Linen · US PlugDia 40cm x H 60cm / ∅ 15.7″ x H 23.6″
Dark Grey · US PlugDia 45cm x H 75cm / ∅ 17.7″ x H 29.5″
Linen · US PlugDia 45cm x H 75cm / ∅ 17.7″ x H 29.5″
Does The Selected Shipping Service Apply To My Country And What Is The Carrier? How Long Will It Take To Arrive?
If you are not sure if our delivery service is supported in your country or region, please get in touch with us via [email protected]
Delivery times = Process time (order preparation) + Shipping time
Free shipping:
• Carrier: DPD
• Cost: Free
• Process Time: 1-2 weeks
• Shipping Time: 2-4 weeks: To the Netherlands and most European countries (except Iceland, Norway, Cyprus)
Fastest shipping:
• Carrier: DHL/DPD
• Cost: €10 - €200 (Shipping costs vary depending on the number of products)
• Process Time: 1-3 days
• Shipping Time:
2-5 days: Germany
3-7 days: France, Spain, Italy, Nertherlands, Belgium, Poland, Sweden, Austria
6-10 days: Other European countries
Corresponding products: Specified products (For details, please refer to SKU information of each product page)
Note: Tariff-free
Specific countries: Norway, Iceland and Cyprus
• Carrier: UPS/DHL Express
• Cost: €100 per piece
• Process Time: 1-2 Weeks
• Shipping Time: 5-7 Days
Note: Fluctuating delivery times depending on flight information for the order time.
Transport time
Transport time = process time (order preparation) + shipping time
process time: For most cases, we will process your order within 7-14 days (Only the order preparation. Not including the shipping time and delivery time).
European region(except Iceland, Norway, Cyprus): 2-5 Weeks | Free Shipping
EMS European region(except Iceland, Norway, Cyprus): 3-7 Working Days | Fast Shipping
After the customer pays the fast shipping fee (including Fast Shipping, FedEx and other fast shipping methods), if it has been shipped. Shipping costs are non-refundable.
How Can I Track The Package?
How Can I Cancel My Order?
Note:
What Should I Do If The Goods Received Are Damaged (incorrect)?
When Will I Receive My Refund?
Does The Voltage Required By The Product I Purchased Match The Country Where I Am Located?
A visual starting point for scale, height and quantity. Begin with the fixture type, then compare the dimensions against your room, table, bed or wall.
Center-to-center spacingGap between shadesMeasure the room or the furniture the light belongs to. The ranges below are design starting points; always check the exact product dimensions and installation instructions.
Room 5 × 4 m → about 75 cm for a central pendant or chandelier.
Measure from the tabletop or worktop to the lowest point of the fixture.
For open circulation areas, check the complete drop including canopy and suspension.
Use the table or island as the anchor. Draw the full shade widths on paper before you decide how many to buy.
Use the same room formula as a pendant, then allow extra visual weight for multiple arms, tiers or a deep body.
Flush and semi-flush fittings suit lower ceilings, bedrooms, hallways and rooms where a clear walking route matters.
Wall lights are read at eye level, so mark the position while standing, sitting and using the room as intended.
Table lamps work best when the base, shade and furniture read as one proportion. Judge the light from the seated position.
Choose the position from the chair or sofa first, then check the base, cord and shade against the walking path.
Bring the product page, room measurements and a quick photo to your installer. The product instructions and local electrical requirements always take priority.
Use paper or tape to test the shade width, lowest point and sightlines.
Confirm the ceiling, wall or junction box supports the complete fixture weight.
Check voltage, dimmer compatibility, bulb or driver and any location rating.