Room centre
Length + width = starting diameterRoom 5 × 4 m → about 75 cm for a central pendant or chandelier.
Voer je code in bij het afrekenen.
Details
Three close views show the rounded hood, curved arm, and stepped circular backplate
Brass wall sconce
A curved semi-cylindrical hood rests on an arched gooseneck arm and a stepped circular backplate in antique brass. The hood sends functional directional light as a focused wash over a bedside, artwork, shelving, a mantel, or a mirror. It is a hardwired indoor wall fixture for task and accent light, not a full-room source
Highlights
The same projection and height come in two widths, with a brass body and two bulbs that are not included
The hood, arm, and backplate are brass, shown in an antique brass finish, with brass and black also listed
Both sizes share an 8.5″ projection and 6.3″ height. The 16.1″ width suits a bedside or small artwork; the 22″ width covers a longer stretch of shelving, a mantel, or a wide mirror
Each sconce takes two E26 or E27 LED or Edison bulbs, not included, and is wired to an external wall switch
The arched gooseneck and semi-cylindrical hood cast a focused wash where the hood is aimed
Specifications
| Height | L 41 × W 21.5 ×: 16 cm. L 56 × W 21.5 ×: 16 cm |
|---|---|
| Bulbs | 2 × E26 or E27, not included |
| Bulb type | LED or Edison |
| Direction | Directional |
| Mounting | Wall mount, hardwired, indoor use only |
| Control | External wall switch, not included |
| Voltage | AC 110–240V |






Antique BrassL 16.1″ x W 8.5″ x H 6.3″
BlackL 16.1″ x W 8.5″ x H 6.3″
BrassL 16.1″ x W 8.5″ x H 6.3″
Antique BrassL 22″ x W 8.5″ x H 6.3″
BlackL 22″ x W 8.5″ x H 6.3″
BrassL 22″ x W 8.5″ x H 6.3″
Does The Selected Shipping Service Apply To My Country And What Is The Carrier? How Long Will It Take To Arrive?
If you are not sure if our delivery service is supported in your country or region, please get in touch with us via [email protected]
Delivery times = Process time (order preparation) + Shipping time
Free shipping:
• Carrier: DPD
• Cost: Free
• Process Time: 1-2 weeks
• Shipping Time: 2-4 weeks: To the Netherlands and most European countries (except Iceland, Norway, Cyprus)
Fastest shipping:
• Carrier: DHL/DPD
• Cost: €10 - €200 (Shipping costs vary depending on the number of products)
• Process Time: 1-3 days
• Shipping Time:
2-5 days: Germany
3-7 days: France, Spain, Italy, Nertherlands, Belgium, Poland, Sweden, Austria
6-10 days: Other European countries
Corresponding products: Specified products (For details, please refer to SKU information of each product page)
Note: Tariff-free
Specific countries: Norway, Iceland and Cyprus
• Carrier: UPS/DHL Express
• Cost: €100 per piece
• Process Time: 1-2 Weeks
• Shipping Time: 5-7 Days
Note: Fluctuating delivery times depending on flight information for the order time.
Transport time
Transport time = process time (order preparation) + shipping time
process time: For most cases, we will process your order within 7-14 days (Only the order preparation. Not including the shipping time and delivery time).
European region(except Iceland, Norway, Cyprus): 2-5 Weeks | Free Shipping
EMS European region(except Iceland, Norway, Cyprus): 3-7 Working Days | Fast Shipping
After the customer pays the fast shipping fee (including Fast Shipping, FedEx and other fast shipping methods), if it has been shipped. Shipping costs are non-refundable.
How Can I Track The Package?
How Can I Cancel My Order?
Note:
What Should I Do If The Goods Received Are Damaged (incorrect)?
When Will I Receive My Refund?
Does The Voltage Required By The Product I Purchased Match The Country Where I Am Located?
A visual starting point for scale, height and quantity. Begin with the fixture type, then compare the dimensions against your room, table, bed or wall.
Center-to-center spacingGap between shadesMeasure the room or the furniture the light belongs to. The ranges below are design starting points; always check the exact product dimensions and installation instructions.
Room 5 × 4 m → about 75 cm for a central pendant or chandelier.
Measure from the tabletop or worktop to the lowest point of the fixture.
For open circulation areas, check the complete drop including canopy and suspension.
Use the table or island as the anchor. Draw the full shade widths on paper before you decide how many to buy.
Use the same room formula as a pendant, then allow extra visual weight for multiple arms, tiers or a deep body.
Flush and semi-flush fittings suit lower ceilings, bedrooms, hallways and rooms where a clear walking route matters.
Wall lights are read at eye level, so mark the position while standing, sitting and using the room as intended.
Table lamps work best when the base, shade and furniture read as one proportion. Judge the light from the seated position.
Choose the position from the chair or sofa first, then check the base, cord and shade against the walking path.
Bring the product page, room measurements and a quick photo to your installer. The product instructions and local electrical requirements always take priority.
Use paper or tape to test the shade width, lowest point and sightlines.
Confirm the ceiling, wall or junction box supports the complete fixture weight.
Check voltage, dimmer compatibility, bulb or driver and any location rating.